(1) The machine is able to continuously soften and tinning the
(2) Both tungsten and diamond dies can be used during tinning.
(3) The heat preservation device for tinning furnace and anneal
furnace is researched by experts to keep even temperature and save
(4) The pilot wheel has its own vary speed motor, the speed can be
(5) Reeling machine is horizontal design for easy dismantle.
(6) The reeling machine has top and bottom two layers, less cubage
and save space; It has two independent line distributing device for
winding different diameter tinning line at the same time.
|number of wire (h)||40||32||24|
|finished wire diameter (mm)||φ0.1-φ0.32||φ0.1-φ0.32||φ0.1-φ0.32|
|pay off method||hairbrush wire placing|
|annealing method||tubular annealing|
|mode of tin-plating||single-furnace hot dip(transverse plating) mould tin-scraping|
|mode of wire receiving||torque motor 1.2-1.8N.M|
|installed thermal power||64.5||64.5||64.5|
|installed dynamic power||12||10||9|
|total installed power||76.5||74.5||73.5|
|traversing control||decelerate motor,loading & unloading unaided traversing|
Rod Breakdown Machine
Intermediate Wire Drawing Machine
Fine Wire Drawing Machine
Double Twist Bunching Machine
Continuous Annealing Tin-Coating Machine